StreetStrider 3i Assembly

Unpack/ Tool Explanation	00:36 - 15:05
STEP 1: Front Beam Assembly	15:06 - 22:32
3i Rear Wheel Explanation	22:33 - 25:26
STEP 2: Rear Wheel Installation	25:27 - 29:30
STEP 3: L Crank Arm Installation	29:31 - 32:23
STEP 4: Lower Strider Pole Installation	32:24 - 38:11
STEP 5: R Crank Arm Installation	38:12 - 42:39
Cheater Bar Explanation	42:40 - 43:17
STEP 6: How To Tension The Chain	43:18 - 44:54
STEP 7: 3i Bell Crank Installation	44:55 - 46:59
STEP 8: Upper Strider Poles Installation	47:00 - 53:42
Grit Paste Explanation	47:22 - 49:19
STEP 9: How To Inflate The Tires	53:43 - 55:32
STEP 10: Positioning The Brake Levers	55:33 - 57:02
STEP 11: How To Set The Rear Brake	57:03 - 1:01:41
STEP 12: Front Wheel Alignment	1:01:42 - 1:07:37
Steering Rod End Explanation	1:07:38 - 1:08:55
STEP 13: How To Set The Stop Discs	1:08:56 - 1:12:39
STEP 14: How To Set The Front Brakes	1:12:40 - 1:31:07
STEP 15: Cable Ends, Reflectors, & Zip Ties	1:31:17 - 1:34:25
STEP 16: 3i Gear Alignment	1:34:26 - 1:36:21
Seating The Shifter Cable Explanation	1:36:22 - 1:38:09
Brake Lever Barrel Adjuster Explanation	1:38:10 - 1:39:11
STEP 17: Front Brake Check	1:39:12 - 1:40:28
STEP FINAL: The Drop Test	1:40:29 - 1:41:40